Eccentric Ball Control Valve-Products-KELK

Control Valve Ranges

Linear Control Valve Ranges

GLOBE VALVE

GATE VALVE

SELF-REGULATOR

OTHERS

Rotory Control Valve Ranges

Actuator Ranges

PNEUMATIC CYLINDER ACTUATOR

ELECTRO HYDRAULIC ACTUATOR

Control Accessories And Other

ELECTRO-PNEUMATIC POSITIONER

OTHER CONTROL ACCESSORIES

VALVE INNER PARTS AND WEARING PARTS

Special Valve Ranges

SPECIAL VALVE

Contact us

WUXI KELK APPARATUS &VALVE CO.,LTD
NO.6 DeYu Road,Hongshan Town,Wuxi,Jiangsu,China
Postcode： 214115

+86 (510) 85141699

+86 (510) 85141819

info@kelkflow.com.cn

QQ在线咨询（请点击）

Message

分享到：

BE110 Eccentric Ball Control Valve

BE110 Eccentric Ball Control Valve（Cam winding valve）is a kind of regulating valve with partial sphere as the valve plate. The partial sphere valve plate rotates around an eccentric axis to control fluid. The center of the valve plate is not concentric with the rotating shaft, which can reduces abrasion to increase service life. The rear part of the valve plate is set up with a guiding wing, which is favorable for the stable flow of fluid providing good stability. Secondly, the sphere is pressed to valve seat, which is easy to damage crystal stammer physically, suitable for crystal, stuttering and none-clean media occasions. Also, it has a series of characteristics, like small volume, large flow, adjustable in a wide range and self-cleaning.

Performance Characteristics

1、The sphere is pressed to valve seat, which is easy to damage crystal stammer physically, suitable for crystal, stuttering and none-clean media occasions.
2、The flow path is simple, Cv value is big, and the self-cleaning performance is good.
3、Small volume and light weight, suitable for control
4、When fully open, the flow capacity is large and the pressure loss is small. The medium will not be deposited in the valve body cavity.

Specifications

Body Size	1"(DN25)～12"(DN300)
Body Rating	ANSI Class 150#～600#
Fluid Temp	-45～+550℃
Connections	Clip on(WF)
Body Materials	WCB,CF8,CF8M,etc.
Plug Materials	CF8,CF8M,etc.
Seat Leakage	Metal seat:ANSI Class IV(Cv×0.01%).Soft seat:ANSI Class VI
Rangeability	100:1
Flow Characteristics	Approximate Linear

Product Advantage

1、Material subdivision of the valve seat, suitable for different occasions, classified as soft sealing (reinforced PTFE) and hard seal (stainless steel welding hard alloy).
2、Due to the eccentric structure, the sealing performance is better, and the required torque is small.
3、This series of valves not only has the characteristics that the valve cavity can reduced just by replacing of sealing ring, but also can achieve SLURRY Countermeasures of the application where the flange structure can be designed in the flange connection.
4、This series of valves is widely used in petroleum, chemical, electric power, metallurgy, steel, paper, medicine, food, textile, light industry and other industries.

DownLoad

Back